Elachem® is delighted to provide different product levels for all customer requirements.
-
EMERGING GRADES
Elachem® has developed a new series of products which combines the basic performance requested by the international standards for Safety & Trekking shoes with a special focus on costs. A great compromise for your aggressive products in the new developing markets. In addition, Elachem® can improve your grade with our EndRaise™ concept which begins with recycling your production scrap.
TECHNICAL CHARACTERISTIC STANDARD SD Mid Out Mould Density [g/cm3] ISO 845:2006 0,50-0,55 0,42-0,45 1,00-1,10 Hardness [ShA] DIN 53505 45÷75 35÷55 55÷80 FRD [g/cm3] --- 0,28-0,32 0,21-0,23 0,85-0,95 Elongation [%] DIN 53504 >400 >250 >500 Flex behaviour [Kcycles] DIN 53522 30 --- 30 Ross-flex @ -30°C [Kcycles] ASTM1052/55 20 --- 20 Hydrolysis performance [days] DIN 53504 >10 >10 >10 Abrasion [mg] DIN 53504 <150 --- <150 Rebound [%] ASTM D7121-05 --- --- --- -
ELAPOL® GRADE
The historical and most appreciated products of our company, reliable in each application. Here you can find a great variety of hardness & density suitable for all equipment. It does not matter if you want a single density or TPU/PU or even combined with other material outsoles, Elachem® has the right solution for you.
TECHNICAL CHARACTERISTIC STANDARD SD Mid Out Mould Density [g/cm3] ISO 845:2006 0,48-0,55 0,40-0,43 1,00-1,10 Hardness [ShA] DIN 53505 40÷75 35÷55 55÷80 FRD [g/cm3] --- 0,28-0,32 0,21-0,23 0,85-0,95 Elongation [%] DIN 53504 >550 >400 >650 Flex behaviour [Kcycles] DIN 53522 50 --- 50 Ross-flex @ -30°C [Kcycles] ASTM1052/55 30 --- 30 Hydrolysis performance [days] DIN 53504 >14 >14 >14 Abrasion [mg] DIN 53504 <100 --- <100 Rebound [%] ASTM D7121-05 --- >35% --- -
ELAXTREME® GRADE
The newest development of Elachem® grade, including all the best features your shoes can require. From extreme hydrolysis resistance ( > 4 weeks ) to outstanding rebound ( > 50% ), from amazing low-density midsole ( even 0,35 gr/cm3 ) to grippy light outsole and beyond. Imagine the possibilities for your feet; together we can realise them.
TECHNICAL CHARACTERISTIC STANDARD SD Mid Out Mould Density [g/cm3] ISO 845:2006 0,45-0,50 0,35-0,38 0,90-1,00 Hardness [ShA] DIN 53505 40÷75 35÷55 55÷80 FRD [g/cm3] --- 0,25-0,28 0,18-0,20 0,85-0,95 Elongation [%] DIN 53504 >600 >350 >800 Flex behaviour [Kcycles] DIN 53522 100 --- 100 Ross-flex @ -30°C [Kcycles] ASTM1052/55 100 --- 100 Hydrolysis performance [days] DIN 53504 >28 >28 >28 Abrasion [mg] DIN 53504 <80 --- <50 Rebound [%] ASTM D7121-05 --- >50% --- -
ELACAT® BIO
AND 
Besides focusing on customer needs, another Elachem policy is caring greatly for the environment, as can be seen in our Elacat® BIO products (ISO 16620-4) which combine amazing physical properties, comparable if not better than traditional systems, with BIO raw materials. This family of products is based on vegetable raw materials, which, therefore, do not impact the food chain, with a total biocarbon content up to 70%.
TECHNICAL CHARACTERISTIC STANDARD SD Mid Out Mould Density [g/cm3] ISO 845:2006 0,48-0,55 0,42-0,45 1,00-1,10 Hardness [ShA] DIN 53505 40÷75 35÷55 55÷80 FRD [g/cm3] --- 0,28-0,32 0,21-0,23 0,85-0,95 Elongation [%] DIN 53504 >550 >450 >750 Flex behaviour [Kcycles] DIN 53522 50 --- 50 Ross-flex @ -30°C [Kcycles] ASTM1052/55 30 --- 30 Hydrolysis performance [days] DIN 53504 >21 >21 >21 Abrasion [mg] DIN 53504 <100 --- <100 Rebound [%] ASTM D7121-05 --- >45% --- Elacat® BIO ISO 16620-4
Follow us Linkedin