Polyether and Polyester systems for the production of all types of insoles (including covered ones) with hardness ratings in the range of 10 ÷ 40 ShA and very low density, without compromising physical properties. All the required quality range available, including the Elacat® BIO family ranging between 20 and 70% of renewable BIO content.
INSOLE | |||
ET = polyether based // ES = polyester based | ET | ES | |
TECHNICAL CHARACTERISTIC | STANDARD | ||
Mould Density [g/cm3] | ISO 845:2006 | 0,22-0,28 | 0,22-0,30 |
Hardness [ShA] | DIN 53505 | 18÷40 | 18÷40 |
FRD [g/cm3] | --- | 0,12-0,16 | 0,12-0,16 |
Elongation [%] | DIN 53504 | >200 | >300 |
Flex behaviour [Kcycles] | DIN 53522 | --- | --- |
Ross-flex @ -30°C [Kcycles] | ASTM1052/55 | --- | --- |
Hydrolysis performance [days] | DIN 53504 | >35 | >14 |
Abrasion [mg] | DIN 53504 | --- | --- |
Rebound [%] | ASTM D7121-05 | --- | --- |
Electrical Resistance | EN ISO 20344 | ||
ESD norm | ESD CEI EN 61340-5-1 | ||
Elacat® BIO | ISO 16620-4 | --- |